Brembo stainless steel rear disc
R1200GS/HP/RT/R/ST/S Not water cooled models
K1200S/R, K1300S/R
F800S/ST/GT/R/GS/GSA, F700GS, F650GS twin cylinder
R nineT 2013 on
Associated BMW No.34217664102
Brembo stainless steel disc, 305mm diameter, 40mm width, with bobbin kit (essential when fitting new discs)
R1200GS/Adventure, Pre late 2007
Thrust washers Not included but available seperately if needed
Brembo stainless steel disc, 305mm diameter, 40mm width, 5mm thick (4.5mm min thickness)
With bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins
R1200GS/Adventure + R1250GS/Adv, Late 2007 ONWARDS.
BREMBO sintered, rear brake pads
R1200 water cooled models
Associated BMW No.34218541388
BREMBO sintered front disc pads, caliper set
R1200 water cooled models
R nineT 2013 on
Associated BMW No.34118548028
Brembo pad pins, pair, stainless steel (two piston calipers)
'85 on twin disc models, Not R80/100R
Associated BMW No. 34111454005
Brembo pad pin/clip set
Mono single disc models and R80/100GS
Associated BMW No. 34111454721
Brembo pad pin/clip set
K1/75/100/1100
K1200RS rear
R1100RS rear
'85 on twin disc, Not R80/100R
Associated BMW No. 34111454005
Brembo front brake disc
320mm O/D, 32mm width (area swept by the pad) 5.15mm thick (4.5mm min thickness)
K1200R (ATF) up to 08/06
K1200LT 11/00 on
R1100S 11/2000 to 6/2003 ABS, R1150R/RS and late model R850R
Pre 2008 will require bobbin kit 011721
Post 2008 will require bobbin kit 011719
Brembo front brake disc, for machines without integral bobbins, stainless steel
320mm O/D, 32mm width (area swept by the pad) 4.5mm thick (4.0 min thickness)
F800S/ST/R/GT
R1200RT/ST 11/2007 on
(requires bobbin kit 011720)
Brembo Disc, stainless steel
1974 - '85, not R45/65, GS, ST
Associated BMW No. 34111236566
Brembo caliper rebuild kit
R45/65 '81 - '84
Associated BMW No. 34111454807
Brembo caliper pistons, pair, (front or rear)
'77 - '84, Not R45/65
Associated BMW No. 34211237234
Brembo brake disc
305mm O/D, 40mm(area swept by the pad) 5mm thick (4.5mm min thickness)
If pre 2008 will need bobbin kit 011721
If post 2008 will need bobbin kit 011719
Most GS
K1200, R850/1100 spoke wheel
Brembo Bobbin kit (for 1 disc)
3 piece kit, bobbin, washer and wavey washer
fits withBrembo discs 011901 and 011228
Brembo bobbin kit (for 1 disc)
2 piece kit, bobbin and wavey washer
fits withBrembo discs 011901 and 011228
Brembo bleed nipple rubber dust cover
Associated BMW No. 34211236794