Cable grommet at carb, protects adjuster, all models
Associated BMW No. 13111260874
Bulb holder (large)
K1/75/100/1100
R series "74 on, (models with combined speedo/rev)
Associated BMW No. 62111356714
Brisk spark plug, new design can eliminate surge but lower service life
Replaces 201100 & 201200
Tom says: "Have you got the spark plug removal tool 223194 or the BMW version 223193, more money for the same job and the spark plug (HT) lead puller 223064 for single spark models or the stick coil puller for the twin spark models 023248"
BREMBO sintered, rear brake pads
R1200 water cooled models
Associated BMW No.34218541388
BREMBO sintered front disc pads, caliper set
R1200 water cooled models
R nineT 2013 on
Associated BMW No.34118548028
Brembo pad pins, pair, stainless steel (two piston calipers)
'85 on twin disc models, Not R80/100R
Associated BMW No. 34111454005
Brembo pad pin/clip set
Mono single disc models and R80/100GS
Associated BMW No. 34111454721
Brembo pad pin/clip set
K1/75/100/1100
K1200RS rear
R1100RS rear
'85 on twin disc, Not R80/100R
Associated BMW No. 34111454005
Brembo stainless steel with bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins
320mm diameter, 32mm swept width, 5.15mm thick (4.5mm min thickness)
Multiple applications
F800GT 13> , F800R 09-14 , F800R 15 , F800S/ST 08>
S1000R 14>, S1000RR 09>, S1000XR 15>
K1200GT/S 08>
R1200HP2 MEGAMOTO 08>
R1200RNineT 14>, R1200R Sport, 08-12, R1200R/RS 15>, R1200RT 08>, R1200S/ST 08>
K1300GT/R/S 09>
K1600GT/GTL 11>
Brembo stainless steel disc, 305mm diameter, 40mm width, with bobbin kit (essential when fitting new discs)
R1200GS/Adventure, Pre late 2007
Thrust washers Not included but available seperately if needed
Brembo stainless steel disc, 305mm diameter, 40mm width, 5mm thick (4.5mm min thickness)
With bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins
R1200GS/Adventure + R1250GS/Adv, Late 2007 ONWARDS.