Caliper mounting bolt and washer, stainless steel, pair

16v, not EVO

Associated BMW No. 07119901049

Caliper mounting bolt and washer, front, stainless steel, pair

K75/100/1100/1200 - Not 16v

R45/50/60/75/80/90/100 - '81 on

Associated BMW No. 07119901049

Caliper mounting bolt and washer, rear, stainless steel, pair

Not ABS

Associated BMW No. 07119904253

Caliper mounting bolt and washer, rear, stainless steel, pair

Associated BMW No.07119904253

Caliper mounting bolt, front, stainless steel, pair

Not EVO calipers

Associated BMW No.07119904253

Caliper half bolts

'77 - '85

Associated BMW No. 34211237234

Caliper half bolt, stainless steel, pair

K series, not 16v

R series '85 on, Not G/S

Associated BMW No. 34112310493

Rear bleed nipple, original (fits 211019)

R850/1100/1150/1200C

S1000RR

Associated BMW No.34212314017

Caliper black plastic dust cover, cut out for bleed nipples

Associated BMW No. 34111454653

Black plastic caliper dust cover, (curved edge around piston)

Associated BMW No. 34111454120

Caged nut in frame - many uses

Associated BMW No. 07129926512

Cable ties, (pair) for gaiter to final drive

Associated BMW No. 33172335139

Cable nipple, 12mm

Associated BMW No. 32721234890

Cable nipple

/5 and early /6 models

Associated BMW No. 32721230404

Cable nipple, 10mm

Associated BMW No. 32721233550

Cable grommet at carb, protects adjuster, all models

Associated BMW No. 13111260874

Cable adjusting nut

Associated BMW No. 32721232516

Bush, in top of slider

R80/100GS

Associated BMW No. 31421458222

Bush, bottom of fork tube

R80/100GS

Associated BMW No. 31421458077

Bush on pillion footrest bracket for pannier location

Associated BMW No.46542316012

Bumper bush, top

Pre '81 (and R45/65)

Associated BMW No. 31422000384

Bumper bush, bottom, small black

/5

Associated BMW No. 31421230751

Bumper bush, bottom, large white

Associated BMW No. 31421231314

Bulb holder (large)

K1/75/100/1100

R series "74 on, (models with combined speedo/rev)

Associated BMW No. 62111356714

Bulb holder

Associated BMW No. 63231459136

Bucket shim, please state size required

Associated BMW No. 11327666045

16v

Brisk spark plug, new design can eliminate surge but lower service life

Replaces 201100 & 201200

Tom says: "Have you got the spark plug removal tool 223194 or the BMW version 223193, more money for the same job and the spark plug (HT) lead puller 223064 for single spark models or the stick coil puller for the twin spark models 023248"

BREMBO sintered, rear brake pads

R1200 water cooled models

Associated BMW No.34218541388

BREMBO sintered front disc pads, caliper set

R1200 water cooled models

R nineT 2013 on

Associated BMW No.34118548028

Brembo pad pins, pair, stainless steel (two piston calipers)

'85 on twin disc models, Not R80/100R

Associated BMW No. 34111454005

Brembo pad pin/clip set

Mono single disc models and R80/100GS

Associated BMW No. 34111454721

Brembo pad pin/clip set

'77 - '84

Associated BMW No. 34211238059

Brembo pad pin/clip set

K1/75/100/1100

K1200RS rear

R1100RS rear

'85 on twin disc, Not R80/100R

Associated BMW No. 34111454005

 Brembo stainless steel with bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins

320mm diameter, 32mm swept width, 5.15mm thick (4.5mm min thickness)

Multiple applications

F800GT 13> , F800R 09-14 , F800R 15 , F800S/ST 08>

S1000R 14>, S1000RR 09>, S1000XR 15>

K1200GT/S 08>

R1200HP2 MEGAMOTO 08>

R1200RNineT 14>, R1200R Sport, 08-12, R1200R/RS 15>, R1200RT 08>, R1200S/ST 08>

K1300GT/R/S 09>

K1600GT/GTL 11>

Brembo stainless steel disc, 305mm diameter, 40mm width, with bobbin kit (essential when fitting new discs)

R1200GS/Adventure, Pre late 2007

Thrust washers Not included but available seperately if needed

Brembo stainless steel disc, 305mm diameter, 40mm width, 5mm thick (4.5mm min thickness)

With bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins

R1200GS/Adventure + R1250GS/Adv, Late 2007 ONWARDS.

Brembo brake disc

305mm O/D, 40mm(area swept by the pad) 5mm thick (4.5mm min thickness)

If pre 2008 will need bobbin kit 011721

If post 2008 will need bobbin kit 011719

Most GS

K1200, R850/1100 spoke wheel

Brembo front brake disc

K75/100, non ABS

Associated BMW no.34111457386

Brembo Disc, stainless steel

1974 - '85, not R45/65, GS, ST

Associated BMW No. 34111236566

Front disc, Brembo, deep bowl,

R80GS/S, R45/65

Associated BMW No. 34111236005

Brembo rear brake disc

K100/K75, non ABS

Associated BMW no.34212310206

Brembo front brake disc

320mm O/D, 32mm width (area swept by the pad) 5.15mm thick (4.5mm min thickness)

K1200R (ATF) up to 08/06

K1200LT 11/00 on

R1100S 11/2000 to 6/2003 ABS, R1150R/RS and late model R850R

Pre 2008 will require bobbin kit 011721

Post 2008 will require bobbin kit 011719

Brembo brake disc bobbin kit

R1200/F800 only

Brembo rear disc (rotor only) 

All models except R1200C and R1100RS

Brembo front brake disc, for machines without integral bobbins, stainless steel

320mm O/D, 32mm width (area swept by the pad) 4.5mm thick (4.0 min thickness)

F800S/ST/R/GT

R1200RT/ST 11/2007 on 

(requires bobbin kit 011720)

Original Brembo front brake disc and bobbin kit, for machines without integral bobbins, stainless steel

320mm O/D, 32mm width (area swept by the pad) 4.5mm thick (4.0 min thickness)

R1200RT/ST 11/2007 on

Brembo bobbin kit (for 1 disc)

2 piece kit, bobbin and wavey washer

fits withBrembo discs 011901 and 011228

Brembo Bobbin kit (for 1 disc)

3 piece kit, bobbin, washer and wavey washer

fits withBrembo discs 011901 and 011228

Reed for the engine breather

All models

Associated BMW No. 11111335711

Breather hose

/5 /6 R45 R65

Associated BMW No. 11151255146