Riders footrest spring LH + RH
R1200GS and Adv water cooled models
Associated BMW No.46718526107
Engine balance shaft rear oil seal, sits below the rear crankshaft seal 602730
All R1200 models up to October 2007
Associated BMW No.11117685005
SaferView mirror glass, pair
R80RT R100RS/RT
Associated BMW No.46632302173 and 46632302174
Piston rings, per piston, first oversize
R75
R65 pre '81
Associated BMW No. 11251256478
Piston rings, per piston, first oversize
R80, pre '81
Associated BMW No. 11251335218
SaferView mirror glass, pair
R1200RT not water cooled.
Associated BMW No.51167717773 / 51167717774
Gear box input shaft
'85 on
Associated BMW No. 23212302327
Also available used with 6 months warranty. Phone or email to enquire!
Brembo Disc, stainless steel
1974 - '85, not R45/65, GS, ST
Associated BMW No. 34111236566
Exaust stud nut, each
F800ST/S/GT/GS/GSA/R F700GS F650GS twin cylinder
K1200/1300 S/R/GT K1600GT/GTL (ATF)
S1000RR/R/XR
Associated BMW No. 18217676551
Guide nut on the top of the fork tube, threaded, post 1981 models
R80RT/TIC/ST, R80G/S, R80/7, R100/7, R100CS/RS/RT/TIC
Associated BMW No. 31421241661
Brembo stainless steel disc, 305mm diameter, 40mm width, 5mm thick (4.5mm min thickness)
With bobbin kit (essential when fitting new discs) and equivalent of the permanently attached BMW bobbins
R1200GS/Adventure + R1250GS/Adv, Late 2007 ONWARDS.
Air intake adjusting screws for thottle body, M9 x 75
Associated BMW No.13541342074
Original Brembo front brake disc and bobbin kit, for machines without integral bobbins, stainless steel
320mm O/D, 32mm width (area swept by the pad) 4.5mm thick (4.0 min thickness)
F800S/ST/R/GT
R1200RT/ST 11/2007 on
Sleeve in final drive for the brake operating cam, 1981 onwards.
Associated BMW No. 33112301699
Front caliper repair kit c/w pistons, Brembo calipers
R1200GS/GSA/RT/R/RS, water cooled models only
Associated BMW No.34118556200
Fork seal dust cover, each
R nineT
S1000RR/R,HP4
Associated BMW No.31427718398